Control unit HEADY24

Control unit 24 Vdc with integrated receiver

24 Vdc

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

64 transmitters storable inside the receiver



1 or 2 actuators for swing gates


230 Vac – 50/60 Hz


24 Vdc


Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic and semi-automatic logic | Separate limit switch inputs for each motor | Pedestrian, step by step and stop inputs | Separate photocell inputs in opening-closing and in closing phases | Outputs for configuration as gate open indicator, second radio channel or photocell testing | Autosetting of operating parameters | Separate electronic torque adjustment for each motor | Anti-crushing safety thanks to amperometric detection and encoder management | Separate adjustable slow-downs for each motor | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Control unit power supply 230 Vac – 50/60 Hz
Motor supply 24 Vdc
N. memorisable codes 64
Virtual encoder
Inverter technology
STC System
ARC Only
Maintenance warning
Technical Drawing HEADY24
Terminal Diagram HEADY24