Geared motor VN.MT20 ESW

400 Vac gear motor with encoder, manual chain movement and 1/20 reduction rates
VN.MT20 ESW | Automations for garage & industrial doors | Automatismi Benincà
Download the instruction manual

Industrial use

Sectional doors and rolling doors

400 Vac | three phase

Up to 40 ㎡

Integrated device that guarantees maximum precision during the automation manoeuvring steps

Oil lubricated motors guarantee the maximum lifespan and high performances

VN.MT20 ESW

400 Vac | three-phase

400 Vac gear motor with encoder, manual chain movement and 1/20 reduction rates | Plastic box that makes wiring the motor easier, thanks to the position of the front clip connector and the possibility of reaching three different positions with the wiring | Equipped with absolute encoder that permits the regulation of the positions of the opening and closing limit switches on the door directly from the control unit | Quick plug-in connection for quick and easy installation | Two accessories are available for chain drives with gear speed reduction rates 1:1 (off-axis motor installation) or 1:1.8 (torque or speed multipliers) | Maximum safety guaranteed during rapid release phases, thanks to a micro-switch that cuts the power supply to the motor | Oil lubricated reductions with hardened steel screw and bronze gears guarantee high performance, maximum reliability and silent operation

Power supply 400 Vac (50-60Hz)
Motor supply 400 Vac
Max absorbed current 1.7 A
Max torque 180 Nm
Maximum output rotations 18
Output speed 24 r.p.m.
Shaft hole 1” (25.4 mm)
Limit switch reduction ratio 1/20
Duty cycle 50%
Protection level IP40
Built-in control unit
Integrated receiver
Encoder
Operating temperature -20°C /+50°C
Lubrication OIL
Door surface area 40 ㎡/max
Weight 15.5 kg
N. motors per pallet 24

THINKY

APPLICATION

1 actuator for sectional doors and rolling doors, folding doors with more than two sections, unbalanced shutters and industrial sliding gates

CONTROL UNIT POWER SUPPLY

230 Vac single-phase or 400 Vac three-phase

MOTORS POWER SUPPLY

230 Vac / 800 W or 400 Vac / 2200 W

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with ARC and predesigned for plug-in radio receiver | Predesigned for connection to absolute encoder and quick wiring (VN “ESW” motors) | Autosetting of operating parameters with motors equipped with absolute encoder (VN “ESW” motors) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Open, close, step by step, pedestrian and stop inputs | Inputs for 4 pairs of photocells (configurable as active in opening-closing or in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Output configurable as gate open indicator, second radio channel, service light and area light | Output configurable as gate open indicator or photocell testing output | Output for connecting flashing light | Protection against phase failure and exceeding motor current threshold | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Technical Drawing VN.MT20 ESW
Terminal Diagram VN.MT20 ESW