Control unit BUFFALO160 OTI SC
Industrial use
230 Vac | three phase
Up to 16000 kg
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety
Oil lubricated motors guarantee the maximum lifespan and high performances
64 transmitters storable inside the receiver
BUFFALO160 OTI SC
230 Vac | intensive use
230 Vac three-phase ventilated gear motor for intensive use | The encoder device ensures precision during gate movement | All-metal mechanics and oil lubrication with excellent performance even at low temperatures | Cover and casing in sheet metal with zinc primer and paint finish | The inverter allows the motor speed to be gradually varied during both acceleration and deceleration, as well as ensuring more precise adjustment of the gate movement phases and greater anti-crushing safety | FTC.S integrated photocells available as accessory | Safety sensor that stops the motor power supply during release operations | Access to the unlocking system via customised key and release possible via hexagonal key CH12
Foundation plate not included
| Use | industrial |
| Power supply | 230 Vac (50-60Hz) |
| Motor supply | 230 Vac |
| Max absorbed current | 8,3 A |
| Maximum thrust | 12650 N |
| Opening speed | 4 ÷ 16 m/min |
| Duty cycle | S3 70% |
| Protection level | IP44 (control unit IP54) |
| Built-in control unit | |
| Pinion for rack | M6 Z16 |
| Operating temperature | -20°C /+50°C |
| Lubrication | OIL |
| Maximum gate weight | 16000 kg |
| Weight | 120 Kg |
| N. motors per pallet | 4 |
BUFFALO DRIVE
APPLICATION
1 operator for sliding gates BUFFALO160 OTI SC
CONTROL UNIT POWER SUPPLY
230 Vac single-phase
MOTORS POWER SUPPLY
230 Vac / 750 W three phase with inverter
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Mechanical ventilation | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Motor limit switch inputs | Open, close, pedestrian, step by step and stop inputs | Inputs for 4 pairs of photocells (programmable as active in opening-closing and in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Outputs configurable as gate open indicator light, second radio channel, courtesy light, zone light, accessory test output, flashing light output, gate open alarm and NC input alarm | Autosetting of operating parameters | Electronic motor torque adjustment | Adjustable slow-down systems | Electronic braking guarantees a precise stop even with heavy doors | Number of maneuvers | Programming access password | Maintenance warning
