Geared motor WOLF424
Residential use
24 Vdc
Up to 450 kg
Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
Prepared for the connection of X.BE (KNX) and Q.BE (MQTT) accessories
Designed to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands
64 transmitters storable inside the receiver
Standby power consumption complies with European regulation (EU) 2023/826
WOLF424
24 Vdc | intensive use
24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Standby power consumption complies with European regulation (EU) 2023/826 | Switching power supply 115/230 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Robust and compact (25x16 cm) with a pinion height of only 82 mm, suitable for any installation context, including replacement of existing systems | The main control unit, on the top part of the motor, makes it possible to facilitate the wiring procedure | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor | Anti-crushing system with amperometric obstacle detection | Designed for the connection of the X.BE accessory in order to be integrated with KNX domotics installations and the programming through the app BeUP and the interface PRO.UP | Equipped with integrated magnetic limit switches
Reinforced foundation plate Dima included. Dimensions 256x160x2 mm, motor fixing distance 210x88 mm, 4 holes Ø 10.5 mm
|
1x |
WOLF424 24 Vdc gear motor for intensive use with integrated control unit and virtual encoder |
|
1x |
PUPILLA.T Pair of adjustable photocells with three positions, power supply 14÷30 Vac / 12÷30 Vdc | Option to mount 2 pairs close together without synchronization |
|
1x |
STAR 12 ÷ 255 Vac / 14 ÷ 255 Vdc flashing light with built-in antenna |
|
2x |
TO.GO2VA 2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code |
| Use | residential |
| Power supply | 115 / 230 Vac (50-60Hz) |
| Motor supply | 24 Vdc |
| Max absorbed current | 3.2 / 1.7 A |
| Maximum thrust | 428 N |
| Opening speed | 12 m/min |
| Duty cycle | intensive use |
| Protection level | IP44 |
| Built-in control unit | |
| Integrated receiver | |
| Encoder | |
| Virtual encoder | |
| Magnetic limit switches | |
| Pinion for rack | M4 Z14 |
| Operating temperature | -20°C /+50°C |
| Lubrication | GREASE |
| Maximum gate weight | 450 kg |
| Weight | 6.1 kg |
CP.W24
APPLICATION
1 actuator for sliding door series WOLF424
CONTROL UNIT POWER SUPPLY
115 or 230 Vac (selectable) 50/60Hz
MOTORS POWER SUPPLY
24 Vdc / 9 A
MAIN FUNCTIONS
Integrated LCD display | Integrated radio receiver 433.92 MHz 64 codes with ARC coding | Removable terminal boards | Automatic, semi-automatic and Deadman logic | 3 Multifunction inputs ensure multiple configuration possibilities for each wired input, for example: step-by-step, open, close, stop, pedestrian, active photocell in opening, active photocell in closing, N.C. sensitive edge | Configurable outputs for gate open warning light, second radio channel, courtesy light, zone light, accessory test output, flashing output, gate open alarm, NC input alarm | Output for flashing light connection configurable as steady or flashing light | Autoset of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crushing safety through amperometric detection | Virtual encoder | Adjustable slow-downs | Built-in energy saving system ESA+ | Designed for connection of X.BE (KNX) and Q.BE (MQTT) accessories | Configuration, diagnostics, firmware update, and remote control management via the BeUP app, using the PRO.UP accessory | Number of manoeuvres | Programming access password | Maintenance warning | Set up for connection to SW.CB battery charger (optional) | Standby power consumption complies with European Regulation (EU) 2023/826
