Geared motor BILL30M

Irreversible 230 Vac electromechanical geared motor

230 Vac

Up to 2.5 m per door leaf

BILL30M

230 Vac

Irreversible 230 Vac electromechanical geared motor | Neat design and size, particularly suited to forged iron gates | Easy and quick to install due to compact size and installation geometry | Worm protected by a scraper ring and stainless steel stem, suitable for use in dusty and sandy environments or where there are aggressive atmospheric agents | Easy access release from above | Available in right or left version

BILL30M 2x

BILL30M

Irreversible 230 Vac electromechanical geared motor

HEADY 1x

HEADY

Control unit 230 Vac with integrated receiver

PUPILLA.T 1x

PUPILLA.T

Pair of adjustable photocells with three positions, power supply 14÷30 Vac/12÷30 Vdc | Option to mount 2 pairs close together without synchronization

LAMPY 1x

LAMPY

Flashing light 12÷255 Vac/dc with integrated antenna

TO.GO2VA 1x

TO.GO2VA

2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code

Power supply 230 Vac (50-60Hz)
Motor supply 230 Vac
Max absorbed current 1.1 A
Maximum thrust 2800 N
Opening time 16"
Standard stroke 300 mm
Max stroke 320 mm
Duty cycle 30%
Protection level IP54
Built-in control unit
Encoder
Operating temperature -20°C /+50°C
Lubrication GREASE
Leaf max dimension 2.5 m
Weight 6.1 kg
N. motors per pallet 62
Kit weight 14.6 kg
N. kits per pallet 40

BRAINY

APPLICATION

1 or 2 actuators for swing gates, opposed sliding gates, hydraulic operators, and industrial folding doors

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

230 Vac

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Separate limit switch inputs for each motor | Open, close, pedestrian, step by step and stop inputs | Separate photocell inputs in opening-closing and in closing phases | Input for N.C or 8K2 sensitive edge | Output for electric lock 230 Vac and 12 Vac/dc | Outputs for configuration as gate open indicator, service light, second radio channel and photocell testing | Autosetting of operating parameters (with motors equipped with encoder) | Separate electronic torque adjustment for each motor and operating times | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters| Number of maneuvers | Programming access password | Maintenance warning

HEADY

APPLICATION

1 or 2 actuators for swing gates

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

230 Vac

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, and semi-automatic logic | Step by step, pedestrian and stop inputs | Separate photocell inputs in opening-closing and in closing phases | Output for electric lock 230 Vac/service light | Output as gate open indicator, second radio channel and photocell testing | Separate electronic torque adjustment for each motor and operating times | Fixed slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Technical Drawing BILL30M