Geared motor DU.350NGE
230 Vac
Up to 4.0 m per door leaf
Integrated device that guarantees maximum precision during the automation manoeuvring steps
Integrated device that guarantees maximum precision during the automation manoeuvring steps
Oil lubricated motors guarantee the maximum lifespan and high performances
Prepared for the connection of X.BE (KNX) and Q.BE (MQTT) accessories
Designed to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands
DU.350NGE
230 Vac | intensive use
Irreversible electromechanical geared motors for gates of considerable sizes, equipped with encoder | With BRAINY PLUS control unit or SE.MODULE module, standby power consumption complies with European Regulation (EU) 2023/826 | Oil submerged gear | Cast iron gearwheel | Adjustable mechanical stop included | The encoder guarantees maximum safety and precision while the gate is moving
Cams’ disk not included
| Use | commercial |
| Motor supply | 230 Vac (50-60Hz) |
| Max absorbed current | 1.7 A |
| Torque | 450 Nm |
| Opening time | 22” |
| Duty cycle | intensive use |
| Protection level | IP67 |
| Built-in control unit | |
| Encoder | |
| Operating temperature | -20°C /+50°C |
| Lubrication | OIL |
| Leaf max dimension | 4.0 m |
| Weight | 20.4 kg |
| N. motors per pallet | 32 |
| DU.350CF weight | 14.3 kg |
| N. of foundation boxes per pallet | 24 |
BRAINY
APPLICATION
1 or 2 actuators for swing gates, opposed sliding gates, hydraulic operators, and industrial folding doors
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 600 W + 600 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Separate limit switch inputs for each motor | Open, close, pedestrian, step by step and stop inputs | Separate photocell inputs in opening-closing and in closing phases | Input for N.C or 8K2 sensitive edge | Output for electric lock 230 Vac and 12 Vac/dc | Outputs for configuration as gate open indicator, service light, second radio channel and photocell testing | Output for connecting flashing light | Autosetting of operating parameters (with motors equipped with encoder) | Separate electronic torque adjustment for each motor and operating times | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters| Number of maneuvers | Programming access password | Maintenance warning | Standby power consumption complies with European Regulation (EU) 2023/826
BRAINY PLUS
APPLICATION
1 or 2 actuators for swing gates, opposed sliding gates, hydraulic operators, and industrial folding doors
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 600 W + 600 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 512 codes and 3 radio encodings (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and dead man’s logic | Encoder input for obstacle detection | Separate limit switch inputs for each motor | 6 opto-isolated inputs configurable as open, close, pedestrian, step-by-step, stop, active photocell during opening-closing and photocell active only during closing | 2 separate inputs for sensitive edges configurable according to operation and type | Output for 230 Vac and 12/24 Vdc electric lock configurable | Outputs configurable as gate open indicator light, second radio channel, courtesy light, area light, accessory test output, flashing output, gate open alarm and NC input alarm | Autoset operating parameters with all motor types | Separate electronic adjustment of torque for each motor and of opening and closing times | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Adjustable slowdowns | Integrated ESA+ for energy saving | Prepared for connection of X.BE (KNX) and Q.BE (MQTT) | Configuration, diagnostics, firmware update, and radio control management via the BeUP app, using the PRO.UP accessory | Number of operations | Programming access password | Maintenance warning | Standby power consumption complies with European regulation (EU) 2023/826
