Control unit LOGICA

Control unit 230 Vac with integrated receiver
LOGICA | External control units | Automatismi Benincà
Download the instruction manual

230 Vac

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

64 transmitters storable inside the receiver

LOGICA

APPLICATION

1 or 2 actuators for tilt up doors

CONTROL UNIT POWER SUPPLY

230 Vac - 50/60 Hz

MOTORS POWER SUPPLY

230 Vac / 300 W + 300 W

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with ARC coding | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Separate opening and closing limit switches inputs for each motor | Separate limit switch inputs for one motor | Close, step by step and stop inputs | Input for N.C or 8K2 sensitive edge | Photocell input programmable as active in opening-closing or in closing phases | Output configurable as open gate indicator, second radio channel or photocell testing output | Output for flashing light connection | Output for 24 Vdc service light | Autosetting of operating parameters (with ZED series motors equipped with encoder) | Electromechanical torque adjustment on 4 levels | Autosetting of operation and slow-down parameters | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Control unit power supply 230 Vac – 50/60 Hz
Motor supply 230 Vac / 300 W + 300 W
N. memorisable codes 64
Encoder
Virtual encoder
Inverter technology
STC System
ARC Only
Self-Calibration
Maintenance warning
Password
Technical Drawing LOGICA
Terminal Diagram LOGICA