MATRIX

Control unit 230 Vac with integrated receiver

230 Vac

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

64 transmitters storable inside the receiver

MATRIX

APPLICATION

1 actuator for sliding gate

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

230 Vac

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Motor limit switch inputs | Open, close, pedestrian, step by step and stop inputs | Input for N.C or 8K2 sensitive edge | Photocell input (PHOT O) programmable as active in opening-closing and in closing phases | Photocell input (PHOT C) programmable as active in opening-closing phases | Outputs for configuration as gate open indicator, service light, or second radio channel | Photocell testing output | Autosetting of operating parameters (with motors equipped with encoder) | Electronic torque adjustment | Adjustable slow-downs | Electronic braking guarantees a precise stop even with heavy doors | Advantouch system to configure parameters and manage radio transmitters | Programming access password | Maintenance warning

Control unit power supply 230 Vac – 50/60 Hz
Motor supply 230 Vac
N. memorisable codes 64
Encoder
Virtual encoder
Inverter technology
STC System
ARC Only
Self-Calibration
Maintenance warning
Password
Technical Drawing MATRIX
Terminal Diagram MATRIX
https://www.beninca.com/theme/beninca/img/logo.svg Via del Capitello 45 - 36066 Sandrigo (VI) ITALY info@beninca.com