Control unit THINKY

Control unit 230 /400 Vac with integrated receiver
THINKY | External control units | Automatismi Benincà
Download the instruction manual

230 Vac

400 Vac | three phase

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

64 transmitters storable inside the receiver

THINKY

APPLICATION

1 actuator for sectional doors and rolling doors, folding doors with more than two sections, unbalanced shutters and industrial sliding gates

CONTROL UNIT POWER SUPPLY

230 Vac single-phase or 400 Vac three-phase

MOTORS POWER SUPPLY

230 Vac / 800 W or 400 Vac / 2200 W

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with ARC and predesigned for plug-in radio receiver | Predesigned for connection to absolute encoder and quick wiring (VN “ESW” motors) | Autosetting of operating parameters with motors equipped with absolute encoder (VN “ESW” motors) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Open, close, step by step, pedestrian and stop inputs | Inputs for 4 pairs of photocells (configurable as active in opening-closing or in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Output configurable as gate open indicator, second radio channel, service light and area light | Output configurable as gate open indicator or photocell testing output | Output for connecting flashing light | Protection against phase failure and exceeding motor current threshold | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Control unit power supply 230 Vac single-phase or 400 Vac three-phase
Motor supply 230 Vac / 800 W o 400 Vac / 2200 W
N. memorisable codes 64
Encoder
Virtual encoder
Inverter technology
STC System
ARC Only
Self-Calibration
Maintenance warning
Password
Technical Drawing THINKY
Terminal Diagram THINKY