CP.BULL8 SE
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This is used to set the number of cycles after which the required maintenance of the system is signaled
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
Prepared for the connection of X.BE (KNX) and Q.BE (MQTT) accessories
Designed to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands
64 transmitters storable inside the receiver
Standby power consumption complies with European regulation (EU) 2023/826
CP.BULL8 SE
APPLICATION
1 actuator for sliding door series WOLF8M, BULL8M SE and BULL8 OM SE
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 2,6 A
MAIN FUNCTIONS
Integrated LCD display | Integrated radio receiver 433.92 MHz 64 codes with ARC coding | Removable terminal boards | Automatic, semi-automatic and Deadman logic | 7 multifunction inputs (on the WOLF8M) and 5 multifunction inputs (on the BULL8M SE and BULL8 OM SE) provide multiple configuration options for each wired input, including: step-by-step, open, close, stop, pedestrian, photocell active during opening, photocell active during closing, and N.C. safety edge. | 2 motor limit switch inputs (BULL8M SE and BULL8 OM SE only) | Input for N.C or 8K2 sensitive edge | Two outputs configurable as gate open indicator light, courtesy light, area light, second radio channel, photocell test, flashing light, alarm contact | Output for connecting flashing light | Autosetting of operating parameters | Independent electronic adjustment of motor torque during opening and closing | Independently adjustable slowdown during opening and closing | 3 selectable slowdown modes to suit different applications | Electronic braking | Built-in energy saving system ESA+ | Predesigned for the operation of opposed sliding gates through SIS synchronisation board (optional) | Designed for connection of X.BE (KNX) and Q.BE (MQTT) accessories | Configuration, diagnostics, firmware update, and remote control management via the BeUP app, using the PRO.UP accessory | Number of manoeuvres | Programming access password | Maintenance warning | Standby power consumption complies with European Regulation (EU) 2023/826
