CP.J4ESA | Internal control units | Automatismi Benincà
Download the instruction manual

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

64 transmitters storable inside the receiver



1 actuator series JM.3ESA, JM.4ESA


230 Vac - 50/60 Hz


24 Vdc / 8.5 A


Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Integrated ESA SYSTEM for energy savings | Fixed terminal boards | Automatic and semi-automatic logic | Step by step, open, close, stop and photocell inputs | Input for N.C or 8K2 sensitive edge | Output for configuration as gate open indicator, service light, second radio channel or area light | Output for connecting the flashing light | Photocell testing | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric detection and encoder management | Possibility of setting a slower starting speed for 2 seconds (SOFT START) | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Technical Drawing CP.J4ESA
Terminal Diagram CP.J4ESA