CP.MBY24

CP.MBY24

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

64 transmitters storable inside the receiver

CP.MBY24

APPLICATION

1 or 2 actuators for MBE24 series swing gates

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

24 Vdc / 5 A + 5 A

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Separate limit switch inputs for each motor | Pedestrian, step by step, open, close and stop inputs | Separate photocell inputs in opening-closing and photocell active in closing phases | Input for N.C or 8K2 sensitive edge | Output for electric lock 12 Vdc | Output for configuration as gate open indicator or photocell testing | Ouptut configurable as second radio channel or service light | Autosetting of operating parameters | Separate electronic torque adjustment for each motor | Anti-crushing safety thanks to amperometric detection | Separate adjustable slow-downs for each motor | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Technical Drawing CP.MBY24
Terminal Diagram CP.MBY24