BULL8 OM

230 Vac gear motor with integrated control unit and encoder

Commercial use

230 Vac

Up to 800 kg

Integrated device that guarantees maximum precision during the automation manoeuvring steps

Oil lubricated motors guarantee the maximum lifespan and high performances

64 transmitters storable inside the receiver

BULL8 OM

230 Vac

230 Vac gear motor with integrated control unit and encoder | The encoder device ensures crush prevention and precision in the gate moving phases | Full metal mechanics and oil lubrication ensure maximum gear durability. The type of oil used is also particularly effective, and ensures maximum efficiency even at low temperatures | Reduced mechanical wear on components | Metal release lever

325x100x5 mm, installation template included, motor spacing 300x75 mm, 4 holes Ø 9 mm

1x

BULL8 OM

230 Vac gear motor with integrated control unit and encoder

1x

PUPILLA.T

Pair of adjustable photocells with three positions, power supply 14÷30 Vac/12÷30 Vdc | Option to mount 2 pairs close together without synchronization

1x

LAMPY

Flashing light 12÷255 Vac/dc with integrated antenna

1x

TO.GO2VA

2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code

Power supply 230 Vac (50-60Hz)
Motor supply 230 Vac
Max absorbed current 2.6 A
Maximum thrust 940 A
Opening speed 10.5 m/min
Duty cycle 40%
Protection level IP44
Built-in control unit
Integrated receiver
Encoder
Virtual encoder
Magnetic limit switches
Pinion for rack M4 Z18
Operating temperature -20°C /+50°C
Lubrication OIL
Maximum gate weight 800 kg
Weight 14.6 kg
N. motors per pallet 40
Kit weight 15.4 kg
N. kits per pallet 40

CP.BULL8-OM

APPLICATION

1 actuator for sliding gates, series BULL8M and BULL8 OM

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

230 Vac

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Motor limit switch inputs | Pedestrian, step by step and stop inputs | Photocell input (PHOT O) programmable as active in opening-closing and in closing phases | Photocell input (PHOT C) programmable as active in opening-closing phases | Input for N.C or 8K2 sensitive edge | Output for gate open indicator, service light, second radio channel and photocell testing | Autosetting of operating parameters | Electronic motor torque adjustment | Adjustable slow-down systems | Electronic braking | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password

Technical Drawing BULL8 OM
https://www.beninca.com/theme/beninca/img/logo.svg Via del Capitello 45 - 36066 Sandrigo (VI) ITALY info@beninca.com