Geared motor MBE24

24 Vdc electromechanical operator for intensive use with integrated control unit and receiver

24 Vdc

Up to 2.5 m per door leaf

64 transmitters storable inside the receiver

MBE24

24 Vdc | intensive use

24 Vdc electromechanical operator for intensive use with integrated control unit and receiver | Suitable for gates installed on large posts | Tempered steel mechanical features to guarantee sturdiness and solidity | Operation guaranteed even in the event of a power supply failure through batteries | Amperometric sensor obstacle detection system to prevent crushing | Equipped with open and close limit switches | Option of adjustable wire unlock device that allows opening from the outside in the event of a power supply failure

Arm not included

MBE24 1x

MBE24

24 Vdc electromechanical operator for intensive use with integrated control unit and receiver

MB24 1x

MB24

24 Vdc electromechanical operator for intensive use

BA 2x

BA

Single arm

PUPILLA.T 1x

PUPILLA.T

Pair of adjustable photocells with three positions, power supply 14÷30 Vac/12÷30 Vdc | Option to mount 2 pairs close together without synchronization

LAMPY 1x

LAMPY

Flashing light 12÷255 Vac/dc with integrated antenna

TO.GO2VA 1x

TO.GO2VA

2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code

Power supply 230 Vac (50-60Hz)
Motor supply 24 Vdc
Max absorbed current 0.76 A
Torque 180 Nm
Opening time 10”
Duty cycle intensive use
Protection level IP44
Built-in control unit
Encoder
Operating temperature -20°C /+50°C
Lubrication GREASE
Leaf max dimension 2.5 m
Weight 10.7 kg
N. motors per pallet 39
Kit weight 25.4 kg
N. kits per pallet 12

CP.MBY24

APPLICATION

1 or 2 actuators for MBE24 series swing gates

CONTROL UNIT POWER SUPPLY

230 Vac – 50/60 Hz

MOTORS POWER SUPPLY

24 Vdc

MAIN FUNCTIONS

Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Separate limit switch inputs for each motor | Pedestrian, step by step, open, close and stop inputs | Separate photocell inputs in opening-closing and photocell active in closing phases | Input for N.C or 8K2 sensitive edge | Output for electric lock 12 Vdc | Output for configuration as gate open indicator or photocell testing | Ouptut configurable as second radio channel or service light | Autosetting of operating parameters | Separate electronic torque adjustment for each motor | Anti-crushing safety thanks to amperometric detection | Separate adjustable slow-downs for each motor | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

Technical Drawing MBE24