Control unit BRAINY PLUS
230 Vac
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This is used to set the number of cycles after which the required maintenance of the system is signaled
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
Prepared for the connection of X.BE (KNX) and Q.BE (MQTT) accessories
Designed to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands
512 transmitters storable inside the receiver
Standby power consumption complies with European regulation (EU) 2023/826
BRAINY PLUS
APPLICATION
1 or 2 actuators for swing gates, opposed sliding gates, hydraulic operators, and industrial folding doors
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 600 W + 600 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 512 codes and 3 radio encodings (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and dead man’s logic | Encoder input for obstacle detection | Separate limit switch inputs for each motor | 6 opto-isolated inputs configurable as open, close, pedestrian, step-by-step, stop, active photocell during opening-closing and photocell active only during closing | 2 separate inputs for sensitive edges configurable according to operation and type | Output for 230 Vac and 12/24 Vdc electric lock configurable | Outputs configurable as gate open indicator light, second radio channel, courtesy light, area light, accessory test output, flashing output, gate open alarm and NC input alarm | Autoset operating parameters with all motor types | Separate electronic adjustment of torque for each motor and of opening and closing times | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Adjustable slowdowns | Integrated ESA+ for energy saving | Prepared for connection of X.BE (KNX) and Q.BE (MQTT) | Configuration, diagnostics, firmware update, and radio control management via the BeUP app, using the PRO.UP accessory | Number of operations | Programming access password | Maintenance warning | Standby power consumption complies with European regulation (EU) 2023/826
| Control unit power supply | 230 Vac – 50/60 Hz |
| Motor supply | 230 Vac / 600 W + 600 W |
| N. memorisable codes | 512 |
| Encoder | |
| Virtual encoder | |
| Inverter technology | |
| STC System | |
| ARC Only | |
| Self-Calibration | |
| Maintenance warning | |
| Password |
