BUFFALO DRIVE
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This is used to set the number of cycles after which the required maintenance of the system is signaled
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
64 transmitters storable inside the receiver
BUFFALO DRIVE
APPLICATION
1 operator for sliding gates BUFFALO160 OTI SC
CONTROL UNIT POWER SUPPLY
230 Vac single-phase
MOTORS POWER SUPPLY
230 Vac / 750 W three phase with inverter
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Mechanical ventilation | Automatic, semi-automatic and deadman’s logic | Encoder input to detect obstacles | Motor limit switch inputs | Open, close, pedestrian, step by step and stop inputs | Inputs for 4 pairs of photocells (programmable as active in opening-closing and in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Outputs configurable as gate open indicator light, second radio channel, courtesy light, zone light, accessory test output, flashing light output, gate open alarm and NC input alarm | Autosetting of operating parameters | Electronic motor torque adjustment | Adjustable slow-down systems | Electronic braking guarantees a precise stop even with heavy doors | Number of maneuvers | Programming access password | Maintenance warning
