CP.J4-SE
Integrated device that guarantees maximum precision during the automation manoeuvring steps
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This is used to set the number of cycles after which the required maintenance of the system is signaled
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
64 transmitters storable inside the receiver
Standby power consumption complies with European regulation (EU) 2023/826
CP.J4-SE
APPLICATION
1 actuator series JM.3SE, JM.4SE
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc / 8.5 A
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 64 codes and 3 radio encodings (Advanced Rolling Code, Rolling Code, Fixed Code) | Integrated ESA+ device for energy saving | Fixed terminal blocks | Automatic and semi-automatic operating logic | Step-by-step inputs, open, close, stop, photocell | Input for N.C. or 8K2 sensitive edge | Output configurable as gate open indicator light, courtesy light, second radio channel or zone light | Output for flashing light connection | Photocell test | Operating parameter autoset | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Anti-crushing safety device with amperometric detection and encoder management | Option to set slow start for 2 seconds (SOFT START) | Adjustable slowdowns | Number of operations | Programming access password | Maintenance warning | Standby power consumption complies with European regulation (EU) 2023/826
