Geared motor BULL20T
BULL20T
400 Vac | three-phase, intensive use
400 Vac three phase gear motor for intensive use, with external control unit and electronic braking | Self-ventilated motor for more intense use | Steel anti-vandal protective cover (optional)
Foundation plate with anchor bolts included. Motor and floor fixing distance 269x106 mm n.4 Ø 12 mm
| Power supply | --- |
| Motor supply | 400 Vac |
| Max absorbed current | 1.7 A |
| Maximum thrust | 2000 N |
| Opening speed | 10.5 m/min |
| Duty cycle | intensive use |
| Protection level | IP44 |
| Built-in control unit | |
| Integrated receiver | |
| Encoder | |
| Virtual encoder | |
| Magnetic limit switches | |
| Pinion for rack | M4 Z18 |
| Operating temperature | -20°C /+50°C |
| Lubrication | GREASE |
| Maximum gate weight | 2000 kg |
| Weight | 21.3 kg |
| N. motors per pallet | 20 |
START
APPLICATION
1 actuator for sectional doors and rolling doors, folding doors with more than two sections, unbalanced shutters and industrial sliding gates
CONTROL UNIT POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MOTORS POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MAIN FUNCTIONS
Only deadman’s logic operation | Fixed terminal boards | Motor limit switch inputs | Open, close and emergency stop inputs | Open and close buttons integrated into the control unit | Output for connecting flashing light and auxiliary condenser for starting the motor
THINKY
APPLICATION
1 actuator for sectional doors and rolling doors, folding doors with more than two sections, unbalanced shutters and industrial sliding gates
CONTROL UNIT POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MOTORS POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with ARC and predesigned for plug-in radio receiver | Predesigned for connection to absolute encoder and quick wiring (VN “ESW” motors) | Autosetting of operating parameters with motors equipped with absolute encoder (VN “ESW” motors) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Open, close, step by step, pedestrian and stop inputs | Inputs for 4 pairs of photocells (configurable as active in opening-closing or in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Output configurable as gate open indicator, second radio channel, service light and area light | Output configurable as gate open indicator or photocell testing output | Protection against phase failure and exceeding motor current threshold | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning
